RFI Emission OS-214plus Instrukcja Użytkownika Strona 16
- Strona / 36
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
31
Parallel Interface Requirements
The required cable (IEEE 1284-compliant is recommended) must
have a standard 36-pin parallel connector on one end, which is
plugged into the parallel port located on the back of the printer.
The other end of the parallel interface cable connects to the
printer connector at the host computer. For pinout information,
refer to the Reference Technical Information- Interface
Specification. Serial and Parallel Cabling Requirements.
Data cables must be of fully shielded construction and fitted with
metal or metalized connector shells. Shielded cables and
connectors are required to prevent radiation and reception of
electrical noise.
To minimize electrical noise pickup in the cable:
■Keep data cables as short as possible (6 [1.83m]
recommended).
■Do not tightly bundle the data cables with power cords.
■Do not tie the data cables to power wire conduits.
Notes :
1. Using Centronics allows for a much higher speed
communication than the use of a serial.
2. It is not necessary to set the switch or send any command to
select the parallel or serial port . The printer can automatically
detect it.
3. The default settings can be read from the configuration report.
32
Communicate with the Printer
The bundled printer driver can be applied to all the applications
under Windows 98/2000/NT, and Windows XP. Through this
driver you may run any popular software applications e.g.
MS-Word and print out the contents by this label printer as long as
they are for Windows.
Before installation
1. Check the contents of the driver to ensure it is complete.
2. Make a backup copy of this driver.
3. Read the README.TXT file for installation guide and change
notices.
- Checking Your Box 1
- Power Supply 2
- Peel-Off Option 3
- Cutter Option 3
- Media Compartment 5
- Release Lever 5
- Print Head Module 5
- Ribbon Supply Holder 5
- Ribbon Roll 6
- Bare Core 6
- Ribbon Pick-up Holder 6
- Loading the Media 7
- Media Guides 9
- Peel Off Mode 10
- H Cover 11
- Feed Button 11
- Cutter Mode 12
- Operator Controls 13
- Performing Calibration 14
- Default Settings 14
- OS-204/214/314 15
- Communicate with the Printer 16
- Installing Driver 17
- Set the Parameters 18
- For Win 2000 20
- For NT 4.0 21
- Troubleshooting 24
- D. Miscellaneous 25
- E. Recovery 25
- Caring for Your Printer 26
- 1.General Specifications 27
- Greek and Russian) 29
- 3.Interface Specifications 30
- Parallel (Centronics) 31
- Auto Polling 31
- Sensor Cable 33
- H.Cover 33
- Middle Cover 33
- Base Housing 33
- H. Cover 35
- Print Head Assembly 36
Atec TestEquity-105A manuals
Owner’s manuals and user’s guides for Equipment Atec TestEquity-105A.
We providing 1 pdf manuals Atec TestEquity-105A for download free by document types: User Manual
Komentarze do niniejszej Instrukcji